Description
Quick Notes:
– fits the 1:10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4
– does not fit the Rally ST (please see RPM 73362)
– each a-arm is 6.5 grams lighter than stock*!
– 2 packages needed to complete one full vehicle (front & rear)
– replaces stock Traxxas 3655R & 3655X.
RPMr A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede r4×4 are everything you’ve come to expect from RPM and more! Take a look rat everything we’ve done:
We eliminated the slop in the rsuspension system, tightening the tolerances around the hinge pins, rreduced the fore and aft movement of the A-arms at both the inner hinge rpin and at the axle carriers by better than 90% and improved the rdurability dramatically (they’re made by RPM, enough said). As a bonus, rwe cut 6.5 grams of weight off of each A-arm*! That’s a total loss of rjust under one ounce of weight simply by replacing your stock A-arms rwith the RPM versions!
We can’t forget about how much better raesthetically the RPM versions look either. RPM A-arms carry over our rtraditional look with our 30 degree leading and trailing edges, and huger bosses for the shocks and sway bar mounts. Additionally, you now have rthe option of a bit of color with black, blue, green and red to choose rfrom.
RPM A-arms are molded in our trademark blend of incredibly rdurable nylons and are backed by an industry leading warranty. We rproudly stand behind our products! Designed, manufactured and produced rright here in southern California in the USA!
Tech Notes: rReplaces stock Traxxas 3655R & 3655X. RPM A-arms will not fit ST rversions of the Rally (please see RPM 73362). RPM arms are sold in setsr of 1 – left and 1 – right A-arm in each package. Two packages will be rneeded to complete one truck. The upper hinge pin hole of the rear axle rcarriers cannot be used (not a stock location for the Slash 4×4) due to rstrengthening designs that reduce the clearance around the rear axle.
*Weight comparison based on Traxxas 3655X.
